Inspect

• Inspect that air gauge(s) are working
• Inspect that air pressure builds to governor cutoff (approximately 120 – 140 psi)

Script

“I will now inspect that my air gauges and governor cutoff are working.”

{if necessary pump brakes until pressure below governor cut in}

“If The air gauges were not rising, indicating that the system is building pressure, I would pump the brakes until the gauges were below the cut in pressure which is typically between 90 and 100 psi.. I will now continue to observe the gauges to assure the governor is working and cuts off at approximately 120 – 140 psi.“

{After governor cuts out turn engine off}