Inspect
- Locate and describe the procedure for determining each of these critical fluids are at the proper level:
- Oil
- Coolant
- Power Steering
Script
“With the engine off I would inspect the engine oil, coolant, and power steering levels.”
Oil
“I would check the engine oil using the dipstick.”
“I would remove the dipstick, wipe it clean, fully reinsert it, and remove it again to check the level.”
“It should be between add and full.”
Coolant
“I would check the the coolant I using the marks on the reservoir.”
“The level should be above the minimum and below the maximum.“
Power Steering Fluid
“I would also check the power steering fluid using the marks on the reservoir to determine if it was at the proper level.”
